TENNESSEE EQUIPMENT MODERATED NEWSGROUP AND LIST > East Cost
> Georgia
> New CT520D tig/stick welder 3-in-1 unit plasma welder
New CT520D tig/stick welder 3-in-1 unit plasma welder
Dual Voltage (110/220V) 50A Plasma Cutter / 200 Amps TIG/Stick Welder 3-in-1 Unit
It is Brand New, fully tested DUAL VOLTAGE UNITED 50A / 200 Amps TIG/Stick Welder 3-in-1 Unit Plasma Welder, rated ¾ inches. The retail price is much more than our asking price, but for a limited time, we are offering this unit for a fraction of the price.
· 50 Amps Plasma cutter: Duty Cycle 60% at 50 Amps and 100% at 35 Amps. 0.55 inches clean cut with 7.2 inches per minutes; 1 inch severance cut with 3.1 inches per minute. Rated Output Current is 50Amps under both AC 110V and 220V. Works in both 50 and 60 Hz with operating air pressure as 65 psi @ 3.2 cfm.
· 180 Amps Tig Welder: Duty Cycle 60% at 180 Amps ARC and 100% at 105 Amps ARC. Gas Flow: 2-5 L/Minute.
· 160 Amps Arc Welder: Duty Cycle 60% at 160 Amps and 100% at 95 Amps. Accessories are included.
· Portable: This machine weights only 37 lbs and 485 mm Length x 215 mm width x 315 mm height. This machine comes with torches (Tig and Plasma), ground clamp and cables, Stick holder, air filter, air regulator and initial consumables.
· The newer semiconductor circuits in these machines are designed quite well. With reasonable care it should provide many years of trouble-free service.
Plasma Cutter - Inverter Unit, Ground Cable & ground clamp, Torch with hose, electrode, nozzle, ceramic shield cup and swirl ring, Air filter/regulator, hose, clamps, mounting bracket and owner manual
No refund! The machine is sold with One year Warranty and we always honor our machine warranty. There is no reason to return the machine for refund.
· 220 or 110 VAC power source & plug
