TENNESSEE EQUIPMENT MODERATED NEWSGROUP AND LIST > East Cost
> New Hampshire
> Agencies
> Honeywell 120VAC ultraviolet flame sensor C7061A1012
Honeywell 120VAC ultraviolet flame sensor C7061A1012
120 Vac Flame Sensor, Ultraviolet, Purple Peeper, Self-Checking Dynamic self-checking flame detector used with R7861 Dynamic Self-check Amplifiers for sensing the ultraviolet radiation generated by the combustion of gas, oil, or other fuels.
• Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor 12 times per minute to provide the UV sensor tube checking function.
• Can be mounted horizontally, vertically or at any angle in between.
• The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.
• Field replaceable ultraviolet radiation sensing tube and quartz viewing window.
• Treaded conduit fitting and color-coded leadwires allow rapid electrical installation.
• Two detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.
• Incorporates UV sensor tube checking feature; used with R7861 Dynamic Self-check Amplifiers.
• Protective heat block built into mounting flange.
• -40 F (-40 C) rated ultraviolet sensing tube is supplied.
• C7061A1038 or A1046 5 pin Brad Harrison type (formally 41307N)mating connector not supplied nor available through Honeywell.
Ultraviolet, Purple Peeper, Self-Checking
5 1/4 in. diameter (includes mounting flange) x 7 7/32 in. long
133 mm diameter (includes mounting flange) x 183 mm long
Approvals, Underwriters Laboratories Inc
Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association
Certified: Master Report LR95329-1
Approvals, Industrial Risk Insurers
Dynamic self-checking flame detector
http://hbctechlit.honeywell.com/techlit/images/M10167.gif
