TENNESSEE EQUIPMENT MODERATED NEWSGROUP AND LIST > East Cost
> New Jersey
> Experts with degree
> 100 pcs. siemens # IL55B-X007, optocoupler, 6 pin singl
100 pcs. siemens # IL55B-X007, optocoupler, 6 pin singl
This item includes the following: 100 pcs. Siemens # IL55B-X007. (Sm Package). As always, we will are willing to look at all Best offers! Please note that we will also consider offers on different quantities than we have posted!
Description: OPTOCOUPLER, 6 PIN SINGLE, 100% CTR, !
Optocoupler, Photodarlington Output, High Gain
• High collector-emitter breakdown voltage, 80 V
• High isolation resistance, 10
• Standard plastic DIP Package
• No base terminal connection for improved common
• UL1577, File No. E52744 System Code H or J,
The IL5xB and MOC8021 are optically coupled isolators
with a gallium arsenide infrared LED and a silicon
photodarlington sensor. Switching can be achieved
while maintaining a high degree of isolation between
driving and load circuits. These optocouplers can be
used to replace reed and mercury relays with advantages
of long life, high speed switching and elimination
amb = 25 °C, unless otherwise specified
Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is
not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
Maximum Rating for extended periods of the time can adversely affect reliability.
IL55B-X006 CTR > 500 %, SMD-6 (option 7)
IL55B-X009 CTR > 500 %, SMD-6 (option 9)
IL55B-X007 CTR > 500 %, SMD-6 (option 7)
Parameter Test condition Symbol Value Unit
Derate linearly from 55 °C 1.33 mW/°
amb = 25 °C, unless otherwise specified
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Parameter Test condition Symbol Value Unit
Derate linearly from 25 °C 2.0 mW/°C
Parameter Test condition Symbol Value Unit
Derate linearly from 25 °C 3.3 mW/°C
Isolation test voltage (between
emitter and detector referred to
Tracking resistance, group III
IO = 500 V, Tamb = 25 °C RIO 1012 Ω
IO = 500 V, Tamb = 100 °C RIO 1011 Ω
Lead soldering time at 260 °C T
Parameter Test condition Symbol Min Typ. Max Unit
Parameter Test condition Symbol Min Typ. Max Unit
E = 100 µA, IF = 0 BVECO 5.0 10 V
