TENNESSEE EQUIPMENT MODERATED NEWSGROUP AND LIST   >   East Cost   >   New Jersey   >   Publications   >   2FOR1BID 1PHASE 6KW 500F ss industrial oven powder coat

2FOR1BID 1PHASE 6KW 500F ss industrial oven powder coat


Each chamber is nearly 4 cubic feet inside.
Click the following link for factory contact information.
The previous user was testing product under power. The high temperature wire leads he was using to connect to the product during heating are still in place. They can be removed in about 30 seconds if you don't need them.
The chamber is very clean save for a bit of dust. Color has blued a bit from high temp operation. The circulation fan is inside the chamber with the motor outside on the back. The fan is configured such that there are three back walls to the chamber as shown above.
The doors do have windows so you can see what is going on inside during testing.
A matching pair of Omega 2010 controllers are used for each oven, one for control and the other for safety limit. You do need to make sure you set the units properly as there is ample power to drive the temperature way beyond the rated 500 degrees F of the oven.
The controller is shown just before the temperature reaches the 210 degree C set point (a bit over 400 F). Power output is still on. This unit can also be programmed with up to 8 different time periods for ramping and soaking.
The back side is shown above and below. The control rack for each oven is on rolling rails and can be pulled out forward for easy access. These units are currently set up for separate power input for heat, fan and control for each oven. The heating is single phase 208-240 volts. The fan and control are each 115 VAC single phase.
The image above is the oven placard.
The image below shows one of the controller trays pulled out.
The image above shows one of the proportional heating element power controllers. The image below shows its label.
The front to back distance varies from 18 to 24" due to the multiple back walls with respect to the circulation fan as noted previously.
The height of the chamber is about 18 inches.
Similar related items may be listed separately or available on request.
Might be just what you need for your double industrial oven application.
Click cavlon99 all to see items from the past 30 days-might be something you need that did not sell.
Click here to check for last minute updates and cavlon99 news.
This item may be subject to government export/import restrictions. Click the following link for rules regarding sale/resale of US government property Sale of Government Property.



2FOR1BID 1PHASE 6KW 500F ss industrial oven powder coat