TENNESSEE EQUIPMENT MODERATED NEWSGROUP AND LIST > East Cost
> New York
> Dealers
> New intermatic EH40 energy controls-water heater brand
New intermatic EH40 energy controls-water heater brand
These time switches provide automatic control for electric water heaters. They provide to-the-minute accuracy in programming and time-keeping. The time switches can be programmed for repeat daily scheduling, 5-day working week scheduling, weekend scheduling or any individual day scheduling. Timers can be scheduled for operation during the lowest time-of-day rates or to switch off the electric heater during period of utilities peak power usage. The time switch can be set to operate for up to 6 on/off operations daily for a maximum of 42 on/off operations weekly. Both models provide a convenient external override switch and LED load indicator for ease in scheduling hot water as required for extra hot water demands. The timers include a battery carryover which protects both time keeping and program information for a minimum of 3 years.
* 2400 Volt Clock Supply 50/60 Hz
Find more Intermatic products in our e-bay store: My Stores Logo
This is a double pole timer (on/off)
EH Series Electronic Water Heater Timer
The time switch mechanism shall be a snap-in design to provide ease of mechanism removal for mounting the enclosure. The time switch enclosure shall be a NEMA 1 lockable steel enclosure which shall be painted with an electrostatic painting process to eliminate the potential for corrosion. The time switch shall include an external override to allow overriding of the time switch without opening the cover and to provide override capability when the cover is padlocked. A load indicator (LED) shall be provided in the time switch and shall be visible through a clear display window for viewing the load status without opening the time switch cover. The time switch enclosure shall provide a minimum of 31 cubic inches of wiring space and shall provide a non-removable cover which shall swing open a full 180 degrees. The time switch shall provide clear terminal identification on a see-through non-curling terminal insulator.
Terminal connections shall be made using teeter type terminal screws to provide secure connections for wire sizes up to #10 AWG. Switch configuration shall be __________ (SPST), (DPST) with a UL listed switch rating of:
* 30 amps per pole resistive, inductive, 120/240 volts AC
* 5 amps tungsten, 120/240 volts AC
To read more about this timer, please go to:
http:// /?action=subcat&sid=83
