TENNESSEE EQUIPMENT MODERATED NEWSGROUP AND LIST > Midwest
> Nebraska
> Manufacturers
> 10" bison 6 jaw "set tru" lathe chuck + adapter plate
10" bison 6 jaw "set tru" lathe chuck + adapter plate
10" Bison Chuck 6 Jaw "Set-Tru" T.I.R. 0.0005" With 4 Fine Adjustment Screws , Scroll Chuck, Forged Steel Body, 3-pinion Design.
1 Set full of two-piece reversible jaws hard and master jaws.
1 Set of fine adjustment screws
* Jaws min .79 - Jaws Open 4.65
* 6-Jaw grips firmly with less pressure and less distortion per jaw.
Ideal for thin wall and second opertation work.
Eliminates the need for spring collets.
* 4 micro adjustment screws provide 0.0005" T.I.R. repeatability.
* Extremely high gripping concentricity.
* 2-piece top & master jaws are American Standard Tongue & Groove. 6 Total Jaws included.
* Chuck body made of high quality Forged steel, is safe at high lathe speeds.
* Forged Scroll fully hardened with thread flanks ground on both sides for longer life and higher accuracy.
* Hardened and ground bushings are pressed into the pinion seats.
* 3 pinions are hardened and ground
* Each chuck is balanced within fine limits.
* The Life of Bison "Set-Tru" chucks is approximately 2.5 times longer than universal chucks.
10" Bison "Set-Tru" Chuck Accepts Bison Adapter Plates Only.
As part of this Selling Set; Which 1 Fits Your Spindle Nose?
Yes, L1, LO, and LOO also avaiable
10" Bison "Set-Tru" A-Type Adapter plate
10" Bison "Set-Tru" D-Type Adapter plates
4 D1-Type adapters to choose one from
D1-4 # of studs 3 Stud Diameter 5/8"
D1-5 # of studs 3 Stud Diameter 3/4"
D1-6 # of studs 6 Stud Diameter 7/8"
D1-8 # of studs 6 Stud Diameter 1"
10" Bison "Set-Tru" Threaded Adapter plates
1 Threaded Types to choose one from
