TENNESSEE EQUIPMENT MODERATED NEWSGROUP AND LIST > East Cost
> Florida
> Manufacturers
> Amplifier research PM2002 power meter 40GHZ - 2 channel
Amplifier research PM2002 power meter 40GHZ - 2 channel
* Tested and Working within Manufacturors Specifications
The Model PM2002 is a dual channel high performance power meter that features high speed measurement capability and wide dynamic range.
Frequency Range ..........................................................10kHz-40GHz, power head dependent
Power Measurement Range ...........................................-70dBm to +44dBm, power head dependent
Number of Channels.....................................................Two
Measurement Speed......................................................1 channel : 200 readings/sec.
2 channels : 100 readings/sec.
Power Heads ................................................................Select from a large number of diode and thermocouple Power Heads. The
linearity and frequency calibration factors for the heads are provided in an
Dynamic Range ............................................................Up to 90dB with diode heads, 50dB with thermocouple heads. See Power Head
Inputs ...........................................................................Rear panel HEAD connectors and rear panel IEEE-488 connector standard.
Outputs ........................................................................Rear panel PWR/REF connector, 0dBm, 50MHz.
Rear panel RECORDER BNC connector, 0 to 10V into 1M
Output impedance is 9.09kΩ. May be operated into 1kΩ or 1V fs.
Emulation .....................................................................HP437, HP438 and Boonton 4220A
Displays........................................................................Menu-driven 20 character x 4 line LCD display. Simultaneous display of dual
channels with bar graph proportional to data display.
Display Units.................................................................Absolute, watts and dBm. Relative, dBr
Display Resolution.........................................................5 digits, nW, μW, mW and W; 4 digits dBm
Measurement Accuracy .................................................Total accuracy is the sum of the following uncertainties: (errors are ± worst case).
Instrumentation Accuracy...............................................0.23% of full scale. 0.46% of 1/10 full scale
Output Frequency: .................................................50MHz ± 1.5%.
Output Level: .........................................................0dBm (1mW) Level Accuracy: 0.03dB (±0.7%) (25°C) for 90 days.
0.051dB (±1.2%) worst case (0° to +55°C) for 1 year.
Source Impedance: ................................................50 ± 1 ohm. SWR: <1.05
Harmonic Output ...................................................<-50dBc.
Other Uncertainties .......................................................For Head, Noise, High Frequency Calibration Uncertainty See Power Head
Calibration Factors........................................................+3dB to -3dB in 0.01dB steps. These calibration factors are stored in nonvolatile
memory. When a frequency other than that stored is used, the meter
linearity interpolates between the calibration factor above and below the
frequency entered to obtain a calibration factor.
Sold with 7 day right of return if unsatisfied.
All purchases outside of North America must be made by wire transfer only.
Call BRL Test with any questions
Be sure to add me to your favorites list!
It's the service after the sale that counts!
SUPERIOR PEOPLE - SUPERIOR SERVICE - SUPERIOR EQUIPMENT - SUPERIOR COMPANY - SUPERIOR SUPPLIER
