TENNESSEE EQUIPMENT MODERATED NEWSGROUP AND LIST > East Cost
> North Carolina
> Dealers
> Sawblades metal cutting
Sawblades metal cutting
These Saws are normally used on Davenport or B/S automatic machines as cut off blades. most have been reground and determined to be undersize in diameter to work in these machines. they cut Aluminum, Copper, Steel, Brass etc.
Altough they may be too small for the above listed machines they should work well for slotting or cutting in a milling machine or table saw with a 1" adapter plate. some have used them for wood and say they cut a smooth finish in wood.
Saws are 5 3/4" to 6 1/4" in diameter. 1/16" all have 1" arbor. All blades are hollow side ground for side cutting relief, aproximately 166 teeth. Saws have about a 12 degree angle groind on end so parts will fall off bar stock burr free. should work well for cut off of metals or wood flat or bar stock.
